Steps:
Step 1: If you are outside the US, check your phone # in Settings -> Phone. Your phone number must be correct and should have the + symbol at the front of it. You should NOT continue unless your phone # is exactly the one that you entered on the purchase page of MiTime.info
Step 2: Install MiTime from my repo (http://cydia.pushfix.info) via Cydia
Step 3: Run MiTime and verify you are authorized – If your phone # matches, you will be.
Step 4: See below and compare to what you have on the screen:
If it says “Ready for activation” and has an “Activate” button, you are ready to use a credit to activate.Step 5: If you are ready, tap the Activate button and follow the prompts. Only send one activation request and wait for up to 15 minutes. It should only take 1 minute, but don’t waste your activation credits. If it doesn’t activate after 15 minutes, eject and re-insert your SIM. Wait 1 minute and then reboot.
If it does NOT say “Ready for activation”, leave it at the this screen until it resets FaceTime® and re-springs (2 minutes). After re-spring, unlock the phone and within one minute it should warn you about costs – IMPORTANT–>click OK. If it doesn’t warn you or does not reset, see the troubleshooting tips below.
If it says “Activated” you can stop here. It will back up your FaceTime® activation for later recovery.
Step 6: If it says the request was sent, stay on this screen. Within 1 minute usually, you will see it change to Activated.
Step 7: You are done. Once it shows Activated, it has saved your token and FaceTime® is fully enabled.
Step 8: The app can be used to fix almost any FaceTime® problem in the future just by running it.
Notes after installation.
- If you turn off FaceTime® or it gets turned off somehow, don’t turn it on in Settings -> Phone. Run the MiTime app and it will fix it and turn it back on.
- If you ever see the warning message about costs again, tap Cancel and run MiTime to see what is going on.
Here's video in action!
You may also like,
No comments:
Post a Comment